There is nothing precious than life, so what we do, always need to do carefully. This statement true for floor or other jacks too. If you do not pay proper attention during work with a jack, it may bring unexpected wounds in your life or even cause death. So there is no scope to lighten the issue. We recommend the following precautions for safely use a floor jack.
How To Use Jack Stands safely
“Parts fail, and things break. It's a fact of life and engineering” said by Matthew Burris, an engineer and a writer of lifewire.com. The failure percentage and probabilities depend on the materials used to manufacture it, maintenance and working procedures. If you buy inferior quality jack the chances of fracture, buckling, fatigue, and creeping will increase. Because of the general wear and tear, a well-made jack device may also fail after use of a few years. On the other side, if you didn’t use it properly, like hoist excess load than rated, or not jack it in the right point of the vehicles, a floor jack may fail.
Whatever the roots of failure, once it starts to happen you will get very less time to save yourselves. The minute you are underneath of vehicles, you will not get enough room to move or crawl rapidly. So it is better to take defensive measures to avoid an accident. As floor jacks designed to elevate vehicles, not for holding it in high, so using a high-quality jack stand will be better instead of depends only on lifting device. You can also use wheel chooks to prevent possible rolling for additional safety.
Never try to use any bricks or blocks as a substitute of the jack stand as you not know the load-bearing capacity of those. It is the question of your life and death, so don’t take it as silly.
Set it in Solid and Flat Surface
Floor jack designed to uplift heavy load. If you will not put it in a stable and even surface, this is obvious that the tool fails to do it works correctly. This failure may lead to severe injuries even death. So could you not take it easy? Always be careful about the place where you are going to set up the floor jack before lifting your vehicles and entrance underneath it. If the surface is not sturdy enough, chances are there that the car jack sink, lowering the height and therefore hit you underneath the vehicle. On the other way, if the surface is sloppy, the trolley jack may slide along in one direction. So, try to avoid jacking into the uneven and soft surface for personal safety.
Follow the Slow and Steady process
Don’t be hurry in the course of up or down your car during jacking. If you lift your vehicle slowly with gently pump the hydraulic jack, you may undoubtedly notice any unexpected thing which helps you to save from probable danger. Similarly, do not release the valve fast during lower the vehicles to allow smooth landing.
Use Correct Jack Point on the Car
During raise, the vehicle, place the jack where it can hold it. Only a few specific parts of your car can handle the pressure employed on it during lift the entire vehicle like a mainframe. Instead of jacking in solid point, if you fix it in a weak point, the risk is there that damage your car or even you might be fall in the hazard.
Finally, follow all the above steps like choose the solid non-sloppy ground, slowly lift the vehicle, set jack stands in a correct position and use wheel chocks, and 100% confirm that the jack stand is not wiggle, you can entrance underneath the vehicles for an oil change or other repairing works. If you found any discrepancy, don’t take a chance.
VIDEO: How to Lift a Car onto Jack Stands
Similar Article : Top 20 Floor Jack
When do we use floor jacks?
Those who have a car, having a floor jack or trolley jack is essential. Because you never know when the emergencies arrived in front of you. Suppose you are traveling in rough terrain or long highway where there is no repair shop, and you need to replace your tire. In such a case if you have no car jack, then you can easily imagine what will go to happen next. Nevertheless, there are countless applications besides replacing tires of this small device have to deliver. Like-
Replacing of Brake Pad:
As a part of regular maintenance, you have to change brake pad of your car for safety. However, for this small issues, if you pay a visit to your nearby repair shop, they will charge a lot which is not economical for you. If you have a hydraulic jack, you can do those jobs smoothly without costs much.
Replacement and Transportation of Transmission and Suspension:
If you are an owner of a car workshop, then it is apparent that you have to change transmission or differentials or other heavy-duty tasks frequently. In such case, if you have no triple lift floor jack, then you will fail to do your job correctly, and customers will get angry on you. The same thing also happens for suspension, without a proper tools jack.
Repair and maintenance jobs:
Maintenance of your vehicle in the regular interval can enhance the longevity to a great extent. Oil change, filter change, tire alignment, and pressure check are some of the tasks you need to do on a scheduled basis. To do these small tasks by yourself at your home garage you should have a car jack.
Hence, compress a spring not the primary task of a car jack, yet, many users use them for that. People use a hydraulic jack to squeeze the spring as it comes out quickly. However, this is not a job for nonprofessionals.
So, we must say that a floor jack is an essential tool both for individuals to keep in car trunks or house garage and for a commercial motor mechanics shop. Before purchase a car jack you should clear about the purposes and to know it accurately you must read our above considerations.
Hydraulic Floor Jack Maintenance Tips
Once you buy the best floor jack from the market, the next vital task is to maintain it sensibly. The long life of a device doesn’t depend on its price or makes only; it mostly depends on maintenance. For the correct repair and maintenance of your floor jack tool, you should monitor the below steps cautiously.
Eliminate Air from Cylinder
The first step you have to follow after receive your floor jack is properly bleed and purge the system air. Air can enter into the system during shipment, assembling or transportation of floor jack. An amount of air in the system may hamper the load-bearing capacity of the jack.
Inspect your jack regularly, including the oil level. Frequent inspection helps you to catch any problem before they occur. If you found any problem try to solve it before next use, otherwise it may cause hazards.
Always keep your car jack clean to get an extended lifespan. Try to keep it out of dust and dirt as those hamper the performance of your floor jack. Regularly wipe it with a lubricated cloth after use and give it a complete clean up periodically.
Keep the moving parts, hinge points and wheels lubricated for smooth performance of the jack. Always use heavy grease instead of oil for lubrication, as it works better and will not drip easily. During general cleaning remember to remove the excess grease build up. Also, check for loose nuts and bolts during lubrication or cleaning.
For better performance of your floor jack, change the oil once in a year and ensure that it is at the optimum level. If hydraulic oil reaches below the required level, it will hamper the lifting system. Similarly, excess oil will also cause damage to your car floor jack. You can purchase jack fluid from the local auto parts store, home improvement center or amazon.com.
Store your floor jack in a clean dust free place and ensure that all the pressure released adequately before storage. Do not put the floor jack inclined or upside down condition. Always store it in an upright position to avoid any leaks or entrance of air.
If you want to value your money, try to follow the above steps to maintain your car jacks appropriately.